China ECS-A60-12V-8mm 3528 SMD LED tsiri masana'antu da masana'antu

ECS-A60-12V-8mm 3528 SMD jagorar tsiri Featured Hoton

ECS-A60-12V-8mm 3528 SMD tsiri mai jagora

LED tsiri fasali kayyade halin yanzu, tsawon rayuwa da kuma High inganci, high CRI, an tsara shi don samar da daidaitattun hasken wuta don aikace-aikace iri-iri don hasken wuta da hasken kai tsaye a cikin otal-otal, gidajen cin abinci, shaguna, ofisoshi da gidaje.

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin

1.SMD3528, ana iya zaɓar nau'ikan kwakwalwan kwamfuta (Epistar / Osram /Cree/ Nichia);

2. FPC tana ɗaukar fuska biyubirgimajan ƙarfe, ƙarfin lanƙwasa, juriya mai juriya, ɗaukar babban halin yanzu;

3. Ƙananan ƙarancin haske, ƙarancin zafi mai kyau, tsawon rayuwa (> 50,000hours);

4. CE / RoHS / UL bokan, 5 shekaru garanti.

5. Naúrar yanke: 50 mm

Aikace-aikace

1.Ado lighting ga hotel, KTV, da dai sauransu
2.Backlight don haske mai haske / alamar haske
3.LED bayyanar / hasken yanayi
4.Holiday kayan ado fitilu, nuni da nunin haske
5. Wuraren zama ko na jama'a

ECS-A60-12V-8mm 2835 SMD jagoran tsiri01

ECS-A60-12V-8mm 2835 SMD jagoran tsiri02

ECS-A60-12V-8mm 2835 SMD jagoran tsiri03

Lura

1.Don Allah a yi amfani da samfuran ƙimar IP daban-daban bisa ga yanayin muhalli daban-daban;

2.Notice babu lalacewa ga da'irar PCB a ƙarƙashin shigarwa;

3.Adopt dacewa da wutar lantarki don dacewa da igiyoyin jagoranci. Ƙarfin wutar lantarki shine 20% girma fiye da max.power of led tube don tabbatar da tsawon lokacin aikin samar da wutar lantarki;

4.Hana shigar da shi lokacin kunna wuta. Kafin kunna wuta, da fatan za a tabbatar cewa wayoyi daidai ne da zarar an gama shigarwa;

5.Don samun mafi kyawun tasirin haske kuma babu lalacewa. Max.tsawon ci gaba shine10mita;

6.Don Allah kada ku kalli hasken na dogon lokaci lokacin da yake aiki don kare idanunku;

7. ƙwararrun ma'aikata kawai na iya rushewa da gyarawa.

CCT/Zaɓuɓɓukan Launi

Rarraba Haske

*Note: Kwanan da ke sama ya dogara ne akan zafin launi na monochrome 4000K.

Umarnin shigarwa

Ishigar shirye-shiryen bidiyo
1. Use sukurori don gyara shirye-shiryen bidiyo akan matsayi na hawa.(* Ana iya amfani da shirye-shiryen bidiyo 3 don mita 1)

Ikafa masu dako
Widan ka shigar da drip LED, shigar da shi daga ƙarshen biyu a lokaci guda, shigarwa daga ƙarshen ɗaya kawai na iya haifar da lalacewa ga tsiri na LED.			If ɗigon LED ɗin ya wuce mita 2, ana ba da shawarar shigar da mutane biyu.

Unemo kayan aiki don kwakkwance igiyar LED a hankali, kuma kar a ja filin LED ɗin kai tsaye.			If Fitilar LED ta wuce mita 2, ana ba da shawarar a sake haɗawa da mutane biyu.

Gargadi:

1. Samfuran ƙarfin lantarki na wannan samfurin shine DC12V; kar a taɓa haɗawa da sauran ƙarfin lantarki mafi girma.

2. Kada a taɓa haɗa wayoyi biyu kai tsaye idan akwai gajeriyar kewayawa.

3. Ya kamata a haɗa wayar gubar daidai gwargwadon launuka waɗanda zanen haɗin ke bayarwa.

4. Garanti na wannan samfurin shine shekaru 5, a cikin wannan lokacin muna bada garantin sauyawa ko gyara ba tare da caji ba, amma ban da yanayin wucin gadi na lalacewa ko aiki mai yawa.

Hanyoyin Magani

Matakan kariya

※ Da fatan za a fitar da tsiri mai jagora tare da keɓantaccen ikon da ake buƙata, kuma madaidaicin tushen wutar lantarki ya kamata ya zama ƙasa da 5%.

※ Don Allah kar a lanƙwasa tsiri a cikin baka mai diamita ƙasa da 60mm don tabbatar da tsawon rai da aminci.

※ Kar a ninka shi idan an sami lahani na beads na LED.

※ Kar a ja wutar lantarki da ƙarfi don tabbatar da tsawon rai. Duk wani karo na iya lalata hasken LED an haramta.

※ Da fatan za a tabbatar cewa an haɗa waya zuwa anode da cathode daidai. Ya kamata wutar lantarki ta kasance daidai da ƙarfin lantarki na tsiri don guje wa lalacewa.

※ LED fitilu ya kamata a adana a bushe, shãfe wuri wuri. Da fatan za a cire kaya kawai kafin amfani. Yanayin yanayi: -25 ℃ ~ 40 ℃. Adana zafin jiki: 0 ℃ ~ 60 ℃. Don Allah a yi amfani da tube ba tare da hana ruwa a cikin cikin gida yanayi da zafi kasa da 70%.

※ Da fatan za a yi hankali yayin aiki. Kar a taɓa wutar lantarki ta AC idan an girgiza.

※ Da fatan za a bar wuta aƙalla 20% don samar da wutar lantarki yayin amfani don tabbatar da samun isasshen wutar lantarki don fitar da samfurin.

※ Kada a yi amfani da mannen acid ko alkaline don gyara samfurin (misali: simintin gilashi).